Ghost Immobiliser Installer
With car theft on the rise A ghost immobiliser is an effective and affordable way to prevent vehicle theft. It creates a unique pin code by utilizing inputs from the steering wheel and dashboard as well as indicators lights.
You'll require the following items to install the Ghost immobiliser: a basic hand tool set including a multimeter, and cable ties. You should also consult the user's manual for specific instructions tailored to your model of immobiliser.
Cost
The Autowatch ghost immobiliser is an innovative device that protects your vehicle from key cloning and hacking. It works by analyzing buttons on your car's inputs and generating a unique number that will allow you to start your car. It doesn't emit radio signals and is therefore difficult to steal. It's a great protection against theft, particularly in high-risk areas. It also helps prevent your vehicle from being taken while it is in the garage for repairs, since it won't start if you don't have the correct PIN code.
Unlike other immobilisers, the ghost immobiliser doesn't require batteries or power cables. It is connected directly to the CAN data network and can be easily moved from one vehicle another. This makes it an excellent choice for owners of luxury and high-performance cars.
Installing an Ghost immobiliser is simple and quick and can be done in just a few hours by TASSA registered, DBS security checked technicians. Before beginning the installation process, it's important to locate the source of power that is constant (12V) and a grounding point on the vehicle's chassis. You can use a wiring diagram to locate these wires and double-check their locations to ensure that they are in the correct location. Mark the wires using tape or labels to keep track of them.
It's time to test the system for any issues or issues. If you experience any issues during the test phase, it's best to seek out an expert. Once you're satisfied that the immobiliser is working correctly, you can now feel the peace of mind which comes from knowing that your vehicle is safe from thieves.
If you reside in an area that is prone to risk, it's a good idea consider investing in a Ghost immobiliser. It will make your vehicle more secure and may even lower your insurance costs. It could also help you sleep better at nights. The cost of the immobiliser as well as its installation is a minimal cost for the peace of mind that it offers.
Installation time
The Ghost immobiliser is a simple and cost-effective method to secure your car from theft. It generates a unique pin using inputs from the buttons on the dashboard or steering wheel, as well as on the door panels. This makes it virtually impossible for thieves to break into your car. You can also alter the code at any time to prevent the previous mechanics or drivers from using the same sequence. It is also compatible with trackers, so if your car is stolen, you'll be able to easily locate it and retrieve it.
When installing a Ghost immobiliser, ensure that you adhere to the user's manual and utilize basic hand tools. The manual provides specific guidance specifically tailored to your specific vehicle model and contains important safety warnings. Additionally, you should always disconnect the battery prior to beginning the installation process to prevent accidental airbag deployment or short circuits in the electrical system. Utilize heat shrink tubing or insulation tape to protect the connections from moisture.
Once you have disconnected your battery, you can start the installation by identifying the CAN L and CAN H wires on the wiring diagram of your vehicle. It is crucial to recognize these wires correctly as they are vital for ensuring that the immobiliser operates correctly. You can check the wires' continuity with a multimeter to ensure they are connected correctly. Mark the CAN L and CAN H wires with labels or tape to help you remember their location during installation.
The CAN H and L wires will then need to be connected to a continuous power source (12V) which also provides the ground connection. Use a fuse tap to shield the connections from power surges. Once you have found the right power source, you are able to connect the immobiliser to it.
After you've completed the installation, you can start the car and test it. If the system is working correctly, the engine will not start unless you enter your pin code or use your phone to authorise it. This makes it virtually impossible for thieves to steal your car and can be used in conjunction with an Thatcham approved alarm or tracker.
Security
Ghost immobilisers are silent defenders that prevent vehicle theft by connecting to the vehicle's CAN data network, and demanding an unobtrusive pin code before the engine can start. They also prevent signal boosting and device spoofing. These are the most common techniques that thieves use to steal vehicles. They can be used with various vehicles, and are also able to be hidden so that they are difficult to identify. They can be turned on in a service mode that allows you to offer your car for maintenance without removing the device.
A professional installation is vital for ghost immobilisers as an incorrect installation could render the device ineffective. Untrained installers could connect the wires incorrectly, or place the device in a location that is easily visible to thieves. This could cause the system to malfunction and may damage your vehicle. A bad installation could end the warranty for your vehicle and device.
The process of installing a ghost immobiliser is complicated, requiring patience and precise work. Installers must mark and identify the wires CAN H and double-check to ensure accuracy. The installer should also locate a power source that provides constant 12V, and test the wires to ensure they are connected correctly.
In the event of an accident the immobiliser will stop the ignition of the vehicle, and display an alert message on the dashboard. It will also send a message to the owner through the CAN H or CAN L wire, letting them know that their vehicle has been involved in an accident. The device can be remotely activated even if the driver has been injured.
A Ghost immobiliser is a good option for cars with luxurious interiors since it doesn't affect their appearance or performance. It's a great option for drivers who want to safeguard their investment and avoid costly repairs. Many insurers offer discounts for drivers who install this device. In addition the device can be used with the GPS tracker to aid police find and recover stolen vehicles.
The Right to Rent
If you are seeking to increase the security of your vehicle, a ghost immobiliser is the ideal solution. These revolutionary devices are discreetly integrated within your vehicle's wiring system, and are almost undetectable. You can also arm and disarm them with an app on your smartphone and give you peace of mind when you leave your vehicle without a guard. ghost installer save you money on insurance premiums.
Ghost immobilisers can help protect your vehicle from being taken away by blocking the signal the engine control unit receives from your key fob. This stops hackers from cloning and hacking of the engine, making it difficult for thieves to get access to your car. The device can also sound a warning or shut down the car's engine if it detects tampering.
The primary concern for vehicle owners is whether installing an immobiliser from Ghost will void their warranty. This question is complex and is dependent on a number of factors. The quality of the installation and the equipment used are both crucial. Professional installers will ensure that the device is properly connected to the wiring of your vehicle to minimize the risk of interference. In addition, they will make sure that the device will not interfere with the vehicle's functions or aesthetics.
Another factor to consider is the type of vehicle you own. Different manufacturers have different rules regarding modifications. Dealer warranties, for example, may be more lenient than aftermarket warranties. You should read the terms and conditions of your vehicle's manufacturer's warranty to be aware of how modifications such as Ghost Immobilisers might impact your protection.
Before starting the installation process, it is recommended to disconnect the battery in order to avoid short circuits and airbag deployment. After that, you need to determine the CAN H and CAN L wires. These are the wires that provide power to the immobiliser. It is essential to mark these wires with a marker or tape so that you are able to identify them in the future. It is also recommended to test each wire with a multimeter to verify their electrical values.